Seca 763 printer-module Manual do Utilizador Página 11

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 72
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 10
11
Weighing with printout
Switch the scale on if necessary.
Switch on the printer at the on/off
switch.
Get the patient to stand on the scale.
The patient should then stand still. The
measured weight is printed out.
If you also want to measure height
(models 763/764 only), perform a
measurement (see "Measuring height”
in the operating instructions for the
scale).
Then press the Data Valid key. The
height and calculated BMI value are
then printed out.
When the load is removed from the
scale, date and time are also printed.
Then tear off the printout towards the
tearing edge.
Note:
If the printout is in 12-hour format,
morning times are marked AM and af-
ternoon times PM.
If you do not require any further print-
out, switch the printer off again at the
on/off switch.
What do I do if ...
… the scale switches off when attempting to print?
Too weak a mains power unit is connected. Connect seca mains power unit
68-32-10-263 supplied (see “Connecting the scale” on page 8).
… the printer does not print during weighing?
Is the printer switched on?
Is the flap of the paper dispenser completely closed?
PAPEr appears in the display?
The paper is finished. Insert a new roll.
Is the flap of the paper dispenser closed?
the printer prints during weighing, but there is nothing to be seen on the paper?
The paper has been put in the wrong way round. Insert the roll the right way round.
on/off switch
on/off switch
Vista de página 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 71 72

Comentários a estes Manuais

Sem comentários